Course Schedules


( HOT 215 ) First Aid/CPR

The student will recognize a serious medical emergency and demonstrate the knowledge of how to access EMS. The student will be able to furnish temporary assistance until competent medical care is obtained or until the chance for recovery without medical care is assured.

1.00 Credit Hour


  Section: A

Seats Available: 41 of 50  

Online Location Dates Time Meeting Days Instructor
  FHTC M112A 02/03/2015 - 03/31/2015 08:20 AM - 10:20 AM T Barb Evans

  Section: B

Seats Available: 4 of 10  

Online Location Dates Time Meeting Days Instructor
  FHTC M112A 02/03/2015 - 03/31/2015 12:30 PM - 02:30 PM T Barb Evans
 

( HOT 220 ) Health Occupations II

The student will explore legal and ethical issues pertaining to the U.S. healthcare system, gain an understanding of the importance of confidentiality and patient documentation, and participate in clinical shadowing experiences with area healthcare providers.

3.00 Credit Hours


  Section: A

Seats Available: 1 of 10  

Online Location Dates Time Meeting Days Instructor
  FHTC M106 02/04/2015 - 05/15/2015 08:20 AM - 11:20 AM M T W R F Stacy Swift

  Section: B

Seats Available: 4 of 10  

Online Location Dates Time Meeting Days Instructor
  FHTC M106 02/04/2015 - 05/15/2015 12:30 PM - 03:30 PM M T W R F Stacy Swift
 

( HOT 223 ) Introduction to Massage Therapy

The student will learn the principles of massage therapy and adapt this knowledge to the clinical setting. The student will be able to utilize these skills in caring for patients and residents in the long term care setting.

1.00 Credit Hour


  Section: A

Seats Available: 1 of 10  

Online Location Dates Time Meeting Days Instructor
  FHTC M106 03/23/2015 - 04/23/2015 08:20 AM - 11:20 AM M R Stacy Swift

  Section: B

Seats Available: 5 of 10  

Online Location Dates Time Meeting Days Instructor
  FHTC M106 03/23/2015 - 04/23/2015 12:30 PM - 03:30 PM M R Stacy Swift
 

( HOT 225 ) Medical Front Office Skills

1.00 Credit Hour


  Section: A

Seats Available: 1 of 10  

Online Location Dates Time Meeting Days Instructor
  FHTC M106 01/05/2015 - 01/26/2015 08:20 AM - 11:20 AM M T W R F Stacy Swift

  Section: B

Seats Available: 4 of 10  

Online Location Dates Time Meeting Days Instructor
  FHTC M106 01/05/2015 - 01/26/2015 12:30 PM - 03:30 PM M T W R F Stacy Swift
 

( HYG 207 ) Clinical Hygiene II

This course is a continuation of HYG 202. This course offers continued development of proficiency in clinical techniques and current procedural practices of the dental hygienist with emphasis on self-evaluation. Topics will include office management, current dental hygiene issues and preparation for board exams. This course provides students the ability to increase proficiency in time management within the clinic. The purpose of this course is to gain speed and maintain quality delivery of dental hygiene treatment. Prerequisites: HYG 202 Clinical Hygiene I, HYG 204 Periodontics, HYG 209 Oral Pathology, HYG 210 Dental Analgesia and Therapeutics

6.00 Credit Hours


  Section: A

FULL  

Online Location Dates Time Meeting Days Instructor
  HYG STE2 01/06/2015 - 04/10/2015 07:30 AM - 04:00 PM T R F Rhonda Weatherbie
  HYG 01/07/2015 - 04/08/2015 08:00 AM - 09:20 AM W Rhonda Weatherbie
 

( HYG 211 ) Dental Public Health and Ethic

This course will provide insight into the needs of public oral health issues, access to care and provision of care as well as ethics related to public health and welfare of the citizens of the communities and states where the dental hygienist may practice. Other topics include ethics and jurisprudence. Prerequisites: HYG 202 Clinical Hygiene I, HYG 204 Periodontics, HYG 209 Oral Pathology, HYG 210 Dental Analgesia and Therapeutics

2.00 Credit Hours


  Section: A

FULL  

Online Location Dates Time Meeting Days Instructor
  HYG STE2 01/07/2015 - 04/08/2015 09:30 AM - 11:20 AM W Rhonda Weatherbie
 

( HYG 214 ) Pharmacology

The students will demonstrate the principles and interpret the physiological aspects of pharmacology to promote rational and optimal drug therapy. The students will continue to reinforce and integrate knowledge of pharmacology in clinical practice. Prerequisites: HYG 202 Clinical Hygiene I, HYG 204 Periodontics, HYG 209 Oral Pathology, HYG 210 Dental Analgesia and Therapeutics

2.00 Credit Hours


  Section: A

FULL  

Online Location Dates Time Meeting Days Instructor
  HYG STE2 01/07/2015 - 04/08/2015 12:20 PM - 02:30 PM W Cheryl Bosiljevac
 

( HYG 216 ) Board Exam Review

This course will include dental hygiene board exam materials for the purpose of mock written tests. Prerequisites: HYG 202 Clinical Hygiene I, HYG 204 Periodontics, HYG 209 Oral Pathology, HYG 210 Dental Analgesia and Therapeutics

3.00 Credit Hours


  Section: A

FULL  

Online Location Dates Time Meeting Days Instructor
  HYG STE2 01/07/2015 - 04/08/2015 02:30 PM - 04:20 PM W Cheryl Bosiljevac
 

( HYG 218 ) Clinical Hygiene III - Office Simulation

1.00 Credit Hour


  Section: A

FULL  

Online Location Dates Time Meeting Days Instructor
  HYG 04/13/2015 - 05/14/2015 08:00 AM - 04:30 PM T W R F Rhonda Weatherbie
 

( IET 108 ) Technical Drawing

Students completing this course will be able to navigate, manipulate, and create technical drawings utilizing a computer based drawing software. Students will draw common electrical and mechanical components utilizing 2D drawing software. Students will be expected to be able to open and manipulate projects and resave them.

1.00 Credit Hour


  Section: A

Seats Available: 14 of 20  

Online Location Dates Time Meeting Days Instructor
  TECH T107A 01/09/2015 - 03/13/2015 12:30 PM - 03:00 PM F Irene Lopez

  Section: B

Seats Available: 17 of 20  

Online Location Dates Time Meeting Days Instructor
  TECH T107A 03/13/2015 - 05/15/2015 12:30 PM - 03:00 PM F Irene Lopez
 

( IET 110 ) Residential Wiring I

Students will identify the proper tools, and develop high standard skills in maintenance, troubleshooting, installing, as well as repairs in residential wiring. Students will use Ohms Law principles to understand the theory of electricity, and practice wiring different circuits common to residential wiring. Students will demonstrate proper method of installing parallel as well as series circuits using multiple switches and loads.

3.00 Credit Hours


  Section: A

Seats Available: 9 of 17  

Online Location Dates Time Meeting Days Instructor
  TECH T105 01/05/2015 - 03/05/2015 12:30 PM - 03:30 PM M T W R Christopher Wilson

  Section: Z

Seats Available: 13 of 16  

Online Location Dates Time Meeting Days Instructor
  TECH T105 01/06/2015 - 03/05/2015 06:30 PM - 09:30 PM T R Olin Karr
 

( IET 113 ) Industrial Electricity

Students will identify the proper equipment, materials and tools used in industrial settings. Students will be introduced to industrial electrical symbols, and electrical schematics. The students will define current, voltage, and resistance as they relate to all values of electricity. Students will identify types of fuses and circuit breakers use in industrial settings. Alternating current will be explained. Control devices such as pushbuttons, selector switches, limit switches, photoeyes, and temperature switches will also be discussed and utilized.

4.00 Credit Hours


  Section: Z

Seats Available: 14 of 21  

Online Location Dates Time Meeting Days Instructor
  TECH T121 01/05/2015 - 03/04/2015 04:00 PM - 07:00 PM M W Christopher Wilson
 

( IET 114 ) Industrial Wiring

Students will learn the basics of control relays, solenoids, generators, motors, control relays, and transformers. Single phase motors will be covered, along with methods of troubleshooting for electrical circuits. Wiring AC circuits will include the wiring of industrial devices such as transformers, relays and timers. Emphasis will be on developing wiring competencies required by industrial equipment. Industrial power distribution will be among the final topics covered. Applied communications skills will be included. Prerequisite: IET 113 Industrial Electricity

4.00 Credit Hours


  Section: Z

Seats Available: 16 of 22  

Online Location Dates Time Meeting Days Instructor
  TECH T121 03/09/2015 - 05/13/2015 04:00 PM - 07:00 PM M W Christopher Wilson
 

( IET 120 ) Electrical Troubleshooting

Electrical Troubleshooting covers all aspects of electrical systems used in the electrical and manufacturing industry. Topics contain electrical system applications, step-by-step troubleshooting procedures, and realistic troubleshooting activities including hand-on troubleshooting methods. Topics covered range from electrical theory to troubleshooting industrial circuits and components, as well as NFPA 70E requirements and electric motor nameplate interpretation. Prerequisites: IET 113 Industrial Electricity, IET 114 Industrial Wiring and IET 213 Motor Controls

4.00 Credit Hours


  Section: A

Seats Available: 3 of 16  

Online Location Dates Time Meeting Days Instructor
  TECH T105 03/09/2015 - 05/15/2015 08:30 AM - 11:30 AM M T W R F Christopher Wilson

  Section: Z

Seats Available: 13 of 16  

Online Location Dates Time Meeting Days Instructor
  TECH T105 03/09/2015 - 05/13/2015 04:00 PM - 07:00 PM M W Craig Mellies
 

( IET 213 ) Motor Controls

Students will construct typical wiring diagrams for push buttons. Control stations will include stop/start wiring. Diagrams of single stations, jogging, and reversing push button stations will be included. Interlocking of motor starters will include mechanical, electrical, and push button interlocks. Timers and relays will be used in conjunction with motor control circuits in general industrial plat applications. Devices such as pilot light will be added to each circuits as well as proper fuse control, and safety disconnects. Prerequisite: IET 113 Industrial Electricity and IET 114 Industrial Wiring

4.00 Credit Hours


  Section: A

Seats Available: 18 of 30  

Online Location Dates Time Meeting Days Instructor
  TECH T105 01/05/2015 - 03/06/2015 08:30 AM - 11:30 AM M T W R F Christopher Wilson

  Section: Z

Seats Available: 12 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T105 01/05/2015 - 03/04/2015 04:00 PM - 07:00 PM M W Craig Mellies
 

( IET 214 ) Programmable Controllers

Students will operate and define the capabilities of programmable controllers, applying the latest technology in industrial computer use. Learning to create programs utilizing relays, switches, and timers will provide opportunities for creating industrial applications. Pre-requisite: IET213 Motor Controls

4.00 Credit Hours


  Section: Z

Seats Available: 11 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T107B 01/06/2015 - 03/05/2015 04:00 PM - 07:00 PM T R David Budke
 

( IET 216 ) Climate Controls

Students will identify the proper tools and develop the skills to operate, maintain, troubleshoot, and repair boiler, HVAC and controls. Students will learn basic boiler and HVAC theory and general operating procedures. Students will develop a preventative maintenance schedule, boiler log and safety checklist. Students will take EPA certification test.

4.00 Credit Hours


  Section: A

Seats Available: 14 of 20  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 01/05/2015 - 03/05/2015 12:30 PM - 03:30 PM M T W R David Budke

  Section: Z

Seats Available: 14 of 20  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 01/06/2015 - 03/05/2015 06:00 PM - 09:00 PM T R Presley McCaleb
 

( IET 231 ) Mechatronics

Students will identify the basic types of conveyers used in industry. This includes the wiring, installation and design of conveyer systems as well as wiring, programming and setting controls such as variable drives used to drive the system. The use of computer logic contained in the conveyers themselves will also be covered. Print interpretation and basic mechanical drawing are introduced to facilitate completion of the final project. Prerequisite: IET 233 Industrial Mechanical Principles

4.00 Credit Hours


  Section: A

Seats Available: 12 of 20  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 01/05/2015 - 03/05/2015 08:30 AM - 11:30 AM M T W R David Budke

  Section: Z

Seats Available: 1 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 01/05/2015 - 03/04/2015 06:30 PM - 09:30 PM M W Christopher Navarro
 

( IET 233 ) Industrial Mechanical Principles

Students will begin by learning the basics of industrial safety. That is followed by hands-on education in precision measurement with calipers and micrometers. The tools of the maintenance technician are covered next, with emphasis on taps and dies, chain breakers, and gear pullers. The final sections are lubrication and bearings, which are critical in manufacturing and power transmission.

4.00 Credit Hours


  Section: A

Seats Available: 24 of 30  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 03/09/2015 - 05/15/2015 12:30 PM - 03:30 PM M T W R F David Budke

  Section: Z

Seats Available: 10 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 03/10/2015 - 05/14/2015 06:00 PM - 09:00 PM T R Heath Maxson
 

( IET 243 ) Hydraulics and Pneumatics

This course begins with the basics of hydraulic and pneumatic principles. Hydraulic history, liquid characteristics, pressure, flow, and force are the topics covered in hydraulics. Pneumatics topics include gas characteristics, pressure, volume, air temperature and moisture content, and multistage compression. Students will develop skills to construct both hydraulic and pneumatic circuits, learn how to read pneumatic and hydraulic symbols and schematics, and disassemble and reassemble pumps, cylinders, valves, and piping.

4.00 Credit Hours


  Section: A

Seats Available: 10 of 19  

Online Location Dates Time Meeting Days Instructor
  TECH T105 03/09/2015 - 05/14/2015 12:30 PM - 03:30 PM M T W R Christopher Wilson

  Section: Z

Seats Available: 15 of 18  

Online Location Dates Time Meeting Days Instructor
  TECH T105 03/10/2015 - 05/14/2015 06:00 PM - 09:00 PM T R Richard Rust
 

Flint Hills Technical College does not discriminate on the basis of sex including pregnant and parenting students, sexual orientation, handicap, race, color, age, religion, marital status, or national or ethnic origin in educational programs, admissions policies, employment policies, financial aid or other College-administered programs. For questions or concerns regarding non-discrimination contact the Director of Human Resources at 620.343.4600.

Flint Hills Technical College 3301 West 18th Avenue Emporia, KS 66801 620.343.4600
© 2016 - 2017 Flint Hills Technical College

Apply Now